Key features

HORSEPOWER

165-280

TECHNOLOGY SOLUTIONS

ON/OFF BOARD

DASHBOARD

SIS

MAX LIFT CAPACITY

9950KG

TRANSMISSION

DYNA 4/6/VT

AGCO POWER

ENGINE

Models

ModelEngine TypeTransmission TypeMax Power (hp)Max Power with EPM (hp)Max Torque @1500rpm with EPM (hp)
MF7714AGCO POWER 6.6 Litre/6 cylinder SCRDyna-4140165687
MF7715AGCO POWER 6.6 Litre/6 cylinder SCRDyna-6 / VT150175745
MF7716AGCO POWER 6.6 Litre/6 cylinder SCRDyna-6 / VT160185790
MF7718AGCO POWER 6.6 Litre/6 cylinder SCRDyna-6 / VT175200840
MF7720AGCO POWER 6.6 Litre/6 cylinder SCRDyna-6 / VT200225980
MF7722AGCO POWER 7.4 Litre/6 cylinder SCRDyna-6 / VT2152401050
MF7724AGCO POWER 7.4 Litre/6 cylinder SCRDyna-6 / VT2352601120
MF7726AGCO POWER 7.4 Litre/6 cylinder SCRDyna-6 / VT255280

Features

EngineEngine Power ManagementThe Dyna transmissionsOperator EnvironmentTractor/Loader CombinationHydraulic EnergyPower Take Off

Previously only available on tractors with Dyna-4 and Dyna-6 transmissions, Engine Power Management (EPM) is now also available on all MF 7700 Dyna-VT models, offering up to 25hp more when it is most needed.

EPM means a tractor that responds automatically to the load imposed on it, and adjusts fuelling accordingly to give you extra power when you need it most. Designed to tackle tough transport and PTO work challenges, advanced electronic engine and transmission management makes more power automatically available under load or at speed.

EPM works by way of transmission electronics which monitor the load and operating conditions within the transmission and PTO according to forward speed, transmission load and PTO activation. This information is then communicated to the electronic engine management system, which regulates accordingly the exact quantity of fuel required and the timing at which it is applied.


Previously only available on tractors with Dyna-4 and Dyna-6 transmissions, Engine Power Management (EPM) is now also available on all MF 7700 Dyna-VT models, offering up to 25hp more when it is most needed.

EPM means a tractor that responds automatically to the load imposed on it, and adjusts fuelling accordingly to give you extra power when you need it most. Designed to tackle tough transport and PTO work challenges, advanced electronic engine and transmission management makes more power automatically available under load or at speed.

EPM works by way of transmission electronics which monitor the load and operating conditions within the transmission and PTO according to forward speed, transmission load and PTO activation. This information is then communicated to the electronic engine management system, which regulates accordingly the exact quantity of fuel required and the timing at which it is applied.


Whether your workload demands a semi-powershift or continuously-variable transmission, MF 7700 tractors can be specified with the format that fits your farm. Dyna-4 and Dyna-6 options offer four and six powershifts respectively, in each of four ranges, which can all be controlled from the armrest joystick or transmission control lever (depending on model).

Massey Ferguson’s Dyna-VT Continuously Variable Transmission continues to be one of the most popular transmissions offering maximum productivity, efficiency and operator comfort.

 

Dyna 4 Transmission


Dyna-4 offers first-rate productivity. The dynamic performance and efficient design behind the Dyna-4 transmission continues to impress with incredibly smooth four-speed, powershift change in each of the four ranges, giving you first-rate productivity, every time.

Dynamic performance comes from the optimised design of the Dyna-4 transmission. Well-known features include Power Control, ‘pedal-free’ operation, four-speed PowerShift, Speedmatching and Autodrive.

Dyna-4 Highlights:

  • Optimum field performance as four range changes provide 16 forward and 16 reverse speeds, all available without having to use the clutch pedal!
  • Operation is simple and less repetitive with ergonomically placed controls, reducing operator fatigue and stress.
  • The left-hand Power Control lever enables convenient and straightforward operation.
  • The choice of pedal and lever mode minimises operator effort and maximises productivity.
  • Straightforward design and proven, reliable components provide exceptionally smooth operation with strength and longevity.
Dyna VT Transmission

With the continuously-variable Dyna-VT transmission, we have developed a system of power transfer that surpasses all others for ease of use and precision. The Dyna-VT is a proven and refined transmission delivering seamless strength hour after hour. It’s intuitive to the operator, the easiest of transmissions to understand and get the most from, and new operators will quickly settle into feeling at one with the machine. Combined with Electronic Power Management, Dyna-VT allows you to get the optimum performance, efficiency and economy from your tractor.

  • Dyna-VT Highlights:
  • 0.03 to 40 km/h or 50 km/h*
  • 40 km/h super Eco or 50 km/h* Eco
  • The choice of two speed ranges optimises torque for different applications
  • Lever or pedal control
  • C1/C2 cruise speeds
  • ‘Supervisor’ maximises the output under varying loads
  • Dynamic Tractor Management (DTM) maintains the set travel speed by automatically adjusting the power (engine speed) according to load
  • Engine Power Management
  • Active Stop
  • Turbo clutch on/off
  • Shuttle aggressiveness adjustment
  • Pedal aggressiveness adjustment
  • Switch between cruise speeds (C1 and C2)
  • Brake pedal to neutral feature*Depending on market ligislation


Sometimes it’s the small details that can make a huge change to your workload. The MF 7700 cab is available with numerous comfort and convenience features. These include automatic beacon activation on the road, comfort light delay at end of the day with automatic work lights extinction, extra plug sockets for mobile phones or laptop, radio and MP3 player (USB, Aux and CD), Bluetooth connection, air suspended swivel seat, telescopic side mirrors and electric de-icing, plus automatic air conditioning.

Cab Suspension
Two types of cab suspension are available. A mechanical and the Active mechanical.

Both system offer unprecedented levels of cab comfort. The new active mechanical system uses silent block bushes and spring assisted shock absorbers to give with the automatic mode the optimum damping forces for all driving situations and the reduction of heave / pitch and roll movement. The active mechanical cab suspension system is adjustable, allowing the operator to set the firmness of ride. Adjustment means the operator can control the ride feel under differing terrain and speed.

Setup and Information Screen

The slim dashboard design provides for quick, clear and easy analysis of operating data, presented on a 70mm x 52mm colour screen – the Setup and Information Screen (SIS). The screen is larger than before and has an improved resolution that makes information on tractor performance, working area, working distance, fuel and urea consumption or engine and transmission temperature easier to read.

The coloured dashboard also offers better visibility throughout the working day, especially in poor light or at night.

Essential
Essential is the base specification for the MF 7700 Series, but it is anything but basic. It provides all the key elements you would expect from Massey Ferguson, with a blend of simplicity, ease of use and versatility to fit needs that require power and performance without excess sophistication.

The right hand console on Essential models features a T-Lever transmission controller, hand throttle with engine speed memo A switch and linkage control. All of the main controls are at your fingertips for maximum convenience and control, whatever the operation. On the console you will also find spool valve and PTO controls.

The right hand pillar contains less frequently-used switches, working light controls and the ignition key.

Essential cab control with loader joystick:
Essential specification tractors are also available with a multifunction loader joystick, which works seamlessly with the fully-compatible range of Massey Ferguson loaders.

Specifically designed for use with MF loaders, the design of the unique multifunction loader joystick ensures smooth operation and incorporates transmission functions such as forward/ reverse selection for the easy, efficient materials handling, whether in the yard or in the field.

Efficient
Efficient is the medium specification package for the MF 7700 Series, designed to help you work smarter and get better results. Choose from either Dyna-6 or Dyna-VT transmissions, a Command Control Armrest and mechanical or electronic spool valves.

Dedicated to delivering increased productivity thanks to its key features, the Efficient specification will enable the operator to work faster, to a higher standard, with more accuracy, together with high levels of comfort, ergonomics and reliability. Stay in control of the most technologically advanced and demanding implements to take advantage of their increased productivity.

Efficient cab control with optional joystick:
Efficient specification tractors are also available with a multifunction joystick. With the Efficient package, the multifunction joystick adds front linkage control capability for even greater productivity when operating front- and rear-mounted implements.

Specifically designed for use with the Integrated Front Linkage System, the design of the unique multifunction joystick ensures smooth operation and incorporates transmission functions such as forward/reverse selection for silage packing, snow blading…


When you purchase your MF 7700 tractor with a loader, it will be specified fully loader-ready to accept the Massey Ferguson MF 900 loader. Your tractor will come complete from the factory with the loader subframe, designed for maximum manoeuvrability and maintenance access, already fitted so that it forms an integral part of the machine.

Tractor/Loader combination highlights:
> A flexible range for a wide variety of applications
> Optional multifunction joystick comes with forward/reverse and speed change for added versatility
> Highest visibility thanks to the smart design of the bonnet and the slim dashboard
> Factory fitted loader subframe for optimum performance from your all-purpose tractor
> Optimum manoeuvrability and access to maintenance operation
> Optional Visioline roof* with Falling Object Protection (FOPS)
> Excellent manoeuvrability with tight turning angles, SpeedSteer and rapid  response from engine and hydraulics

*MF 7714 and MF 7718


Modern implements are placing more and more demands upon the tractors that power them, which are asked to perform faster and respond better. The MF 7700 comes with immense capability to easily handle heavy-duty applications with outstanding lift and drive capacities for the very latest implements.

Heavy Duty Rear Linkage
The upgraded rear linkage now offers lift capacity up to 9950kg. Rear couplers are equipped with an hydraulic decompression system for easy uncoupling of implements and a total of up to five spool valves are available.

Automatic stabiliser installation has also been improved with a shorter chain for the simplest installation. A one way stabilizer each side offers extra reliability.

Integrated Front Linkage System
A heavy duty Integrated Front Linkage System (IFLS) is available as an option and is designed to match the front suspension. Offering up to 4000kg lift with dedicated front valve control, the IFLS features two spool valves and a free return line.

Ultimate Draft Control
Massey Ferguson continues to lead the way in electronic linkage control (ELC). Massey Ferguson’s digital ELC system gives the highest standards of draft control with more accurate depth settings and better ground contour following. The result is more weight transfer, better traction, less wheelslip, reduced tyre wear and reduced fuel consumption whilst still maintaining greater output.

Auxiliary spool valves
Between two and four electro-hydraulic valves are fitted as standard and up to five rear spool valves may be available if required. The Fingertip Spool Valve Management System enables complex equipment to be controlled with ease and precision.

Active Transport Control
When driving across the headland or transporting heavy mounted equipment, implement ‘bounce’ can occur.

Active Transport Control is a shock absorbing system which minimises the ‘pitching’ action – automatically adjusting for different implement weights.

This gives smoother, safer, faster transport and, by reducing shock loads through the lift rams and hydraulic circuits, also minimizes the risk of damage to the rear linkage and the implement.


A wide choice of PTO options are available with standard PTO speeds at 2,000 rpm, where maximum power is achieved. With the benefit of a ‘constant power’ band of up to 1500 rpm and the ability to precisely select any ground speed at the chosen engine speed, you can always achieve a perfect match of

PTO speed, forward speed and power – with optimum economy. MF 7700 Efficient and Exclusive versions are equipped with electrical PTO speed selection for convenience.

An additional fender-mounted engagement PTO start/stop button allows the PTO to be engaged from outside the cab linked to a memorised engine rpm activation. This offers a convenient and safe way to handle applications such as filling a slurry tanker where the operator needs to be outside the cab.

360° View

For a virtual 360° view of this product simply click the interactive image on the right and spin the product to the angle you would like to see.

    MF 7700 360 viewMF 7700 360 viewMF 7700 360 viewMF 7700 360 viewMF 7700 360 viewMF 7700 360 viewMF 7700 360 viewMF 7700 360 viewMF 7700 360 viewMF 7700 360 viewMF 7700 360 viewMF 7700 360 viewMF 7700 360 viewMF 7700 360 viewMF 7700 360 viewMF 7700 360 viewMF 7700 360 viewMF 7700 360 viewMF 7700 360 viewMF 7700 360 viewMF 7700 360 viewMF 7700 360 viewMF 7700 360 viewMF 7700 360 viewMF 7700 360 viewMF 7700 360 viewMF 7700 360 viewMF 7700 360 viewMF 7700 360 viewMF 7700 360 viewMF 7700 360 viewMF 7700 360 view

Enquiry Form







Link: